Monday, May 2, 2011

Romper Tutorial


Things have finally calmed down around here.  We're done moving and the little giggler is feeling great.  I found some time to finish this romper tutorial I've been working on.  It's the same kind of romper I made for the littler giggler's birthday.

Supplies Needed:

1 yard of fabric
Coordinating thread
1/2 inch elastic
Elastic thread
Sewing machine

First print and cut your pattern pieces.  When you print make sure it's a full page photo print.  I made this for my daughter.  She just turned two.  Also cut two 32" x 4" pieces for the straps.  


Attach A & B at the dotted line.  Allow for seam allowance when you cut.

You should have four of theses.

 And these.  For some reason it didn't occur to me (DUH) that I could fold my straps in half so I cut four 32" x 2" pieces.  

Lets start with the straps.  Fold them in half lengthwise right sides facing each other and sew the raw edges together.  Leave one end open and sew the other end shut in an angle.  Carefully turn them inside out and iron them.

Now grab your two top pieces.  Lay one piece down right side up.  Place your straps one top as shown in the picture below.  You can let the ends hang straight down so they're not in the way.


Place your other "top" piece directly on top with the right side facing down.  Carefully pin together so the straps stay put.  Sew together leaving the bottom open for turning.  Be careful not to let the straps get in the way when your sewing around the arm pit.  Next turn it right sides out and iron flat.

Set your top aside for now and grab your four bottom pieces.  Take two of the four and lay them together with right sides facing and sew when indicated in the picture.  Do the same for the other two pieces.

Open up your bottom pieces and you should have two horseshoes.

Place them together with right sides facing each other and sew the "U's" together.

Now if you flip them around they look like a big pair of shorts.  Keep the right sides facing each other and sew the sides shut leaving two inches at the top on each side so we can put the pieces together and add elastic.


Lets add an elastic casing at the top of our romper, but only on one side.  Cut your elastic to half the size of the romper.  It doesn't have to be exact. Add safety pins on both ends of your elastic strip.  This just makes it easier to control.  Feed the first safety pin through the casing until the other end of your elastic matches the end of your casing.  Sew into place.  Next finish feeding the elastic through the other side and sew at the other end of the casing.

Now turn your romper right side out with the front facing up (not the elastic side).  Pin your "top" piece to the front with the raw edges matching up.  Sorry for the crappy picture.  I hope you get the idea.  Note:  There's no elastic in the top picture.  I decided it works better when you add it first.


Now you have your "top" on and your elastic in.  Turn inside out and finish sewing the sides shut.  

Last, we're gonna hem the legs with elastic thread.  Hand wind the elastic thread around your bobbin.  Don't pull in too tight.  Set your sewing machine to it's longest straight stitch.  Mine is four.  Now hem the legs making sure the elastic is on the wrong side.  Make sure you backstitch and the start and finish so it doesn't unravel.


Your done!  

I decided to add a heart applique to up the cuteness factor.






I'll be linking up to these parties.


The Girl Creative Making









Photobucket



Photobucket

18 comments:

  1. very cute, love the big bow tie in back :)

    ReplyDelete
  2. super cute! pinned. I came over from sugarbee

    ReplyDelete
  3. Amanda
    She is just too cute and that romper is adorable. You have so much talent!!!! Ok now I was thinking I could follow your tutorial and make one for me LOL Thanks for stopping by, I added you to my blog roll. Have a great week!!

    xo
    Kate

    ReplyDelete
  4. These are soooooooo cute!! Unfortunately my little BOY probably wouldn't agree :(

    www.sewrayme.co.uk

    ReplyDelete
  5. I want to make two of these for my 2 yo twin nieces, but I'm uncertain of what size paper I should print on, and how to print to make sure it's the right size. Thank you! This romper is so incredibly adorable!!

    ReplyDelete
  6. So cute! I totally want to make one. Are the pattern pieces true to size? (on 8 1/2 x 11" paper?)

    ReplyDelete
  7. It's so cute. I should try to make one for my little girl^^thanks for the tutorial!

    ReplyDelete
  8. Made a super cute one for our little angel. Wish I could send you a pic.
    Thanks for sharing!!

    ReplyDelete
  9. Perfectly adorable! Thanks for sharing!

    ReplyDelete
  10. It is so cute. I wish to make one for my 5yr old daughter how do I adjust the pattern??? Pls reply.hamida_samnani@rediffmail.com

    ReplyDelete
  11. How can i adjust pattern for my 9mth old? size 000? would love some help please :)
    great tutorial by the way. can't wait to have a go!

    ReplyDelete
  12. Where can i buy this pattern ???

    ReplyDelete
  13. Id love to try this for my dtr , would u happen to have the measurements this pattern would fit??

    ReplyDelete
  14. Also, if i already have a pattern for shorts i use for my dtr can i just use that one?

    ReplyDelete
  15. Today I made this really cute romper. You can see pictures on my blog:
    woohoobydavina.blogspot.be

    ReplyDelete

Thank you for commenting. :) You're officially awesome.

AddThis

Related Posts Plugin for WordPress, Blogger...